Taking care of your house means more than repainting the walls every few years, mowing the lawn from time to time and cleaning the rooms every now and then – there are so many things you have to pay attention to, on a daily basis! However, knowing that some problems exist is not possible until you are actually faced with one that requires your attention and fixing. That’s the thing with the plumbing and heating issues – they are not apparent until they become very apparent, but here are some tips and tricks on how you can notice low water pressure and fix it.

The Identification of the Problem

By the time low water pressure is discovered, your installations will probably be in quite a bad condition. In order to prevent this, you should know how to recognise problems and be sure that you are prepared to take actions.

The first thing you need to do is more than easy: check all faucets at your home – the kitchen and the bathroom, mostly, but outdoor ones as well – once in a while. The best and most effective way to perform this operation is to run water in every single one of them and then compare which spout looks the weakest, as well as calculating the exact pressure. Also, it’s more than important to check both hot and cold water because low water pressure isn’t limited to just one.

The Causes

Once you’ve detected the problem, but before solving it, you can investigate the causes – not only will you be able to understand the issue more completely, but also make sure that these problems don’t occur again.

So, in order to determine what the problem really is, you have to be aware of the basic structure of the pipes that lead your water to the faucets. If you live in an old house, or even in a one remodeled some time ago but not quite successfully, low water pressure can originate in the overall plumbing in the house. While this is rarely the case in apartments, what troubles owners of these real estates is the fact that water pressure weakens the higher it goes – those living on the fifth or sixth floor can experience problems because of that. Furthermore, your pipes may not even be the right size, while outdated or faulty plumbing is hard to recognise since they are well hidden. Finally, the pipes can just be rusted or clogged which is why replacing them can solve the problem.

The Solutions

So, once you’ve determined low water pressure and where it originates, you can go to the final step and fix it. While you can sometimes do this by yourself, it’s recommended to call a professional plumbing service such as Monmouth County plumbers to do it for you. If you decide to use DIY method, be sure to unclog the pipes as much as possible and clean the faucet aerators. You can also check for leaks on your pipes and installations and mend them, which will increase the pressure, but, if it is still too low, you might want to leave it to the plumber to reset your water pressure regulator. There are a number of small pieces in these intricate systems, and each one poses a thread.

The Risks

Dealing with water is tricky because incompetent fixes can cause more problems than solutions. However, with low water pressure, things are usually not that serious and complicated, so you can deal with it alone; just be sure to locate the problem and prevent it from reoccurring. Upon further problems, let professionals do their thing.